18 Years Factory offer Elbow, 45° to Mumbai Manufacturer

18 Years Factory offer
 Elbow, 45° to Mumbai Manufacturer

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We are commitment to offer you the aggressive price tag ,exceptional products and solutions high-quality, as well as fast delivery for Ductile Iron Cap , Galvanized Elbow With Ribs , NPT Thread Sockets , We respect your enquiry and it truly is our honor to operate with each friend around the world.
18 Years Factory offer Elbow, 45° to Mumbai Manufacturer Detail:

Table sizes of Elbow, 45°:

新

Specification of Elbow, 45°: 

111 The equipement from DISA Denmark, DJ AMF Japan, SINTOKOGIO Japan widely used in our malleable iron elbow productline, ensures the stability of product quality.
We use spectrometer from Oxford Instruments to check the material’s quality. 未标题-1_05
未标题-1_07 We use high heat value natural gas annealing furnace, strictly control the annealing process, improve the physical properties of the materials.
We use close-grained, high strength, impeccable steel & plate scrap as the raw material, because the quality of the steel is the starting point of the fittings of excellent quality. 未标题-1_09
螺纹 Accurate threads are processed that comply with the precise standards, such as ASME, EU, BS, DIN, etc. The threads have an accurate structure, so the thread length and straightness to allow them to easily engage threaded pipe.
The pipe fittings have outlets ranging from 1/8” through 8”. 未标题-1_16
压扁 Good toughness with long working life.
Smooth surface without any sand hole. 未标题-1_18
镀锌  avg. thickness of zinc coating is higher than 86 um specified in ASME, EN(70um), DIN(70um), SI(78um).

 

 


Product detail pictures:

18 Years Factory offer
 Elbow, 45° to Mumbai Manufacturer detail pictures


Related Product Guide:
Benefits of Brass Ball Valves
All About Pipe Fitting Measurements

To be a result of ours specialty and repair consciousness, our corporation has won an excellent reputation amongst customers all around the entire world for 18 Years Factory offer Elbow, 45° to Mumbai Manufacturer, The product will supply to all over the world, such as: Guatemala , Kuwait , Malta , Aiming to grow to be by far the most experienced supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal merchandise. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. In depth data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're about to make it possible for you to get complete acknowledge about our things and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.


  • http://www.revtool.eu

    This video shows some of the possible jobs which can be done with this range of tools. Afterwards, it illustrates various ssemblies
    in different uses: CNC lathe, CNC work centre, traditional slotting machine It also shows the symmetrical correction carried out using the eccentric bushing.
    The correction method is essential for all lathes
    without Y axis.

    Then two processes are carried out on keyway seats. The second
    case, where the keyway seat made requires two different phases, is indicated with very thick seats. As can be seen, the process is
    divided into two phases. The first phase, called roughing, only removes a part of the material; the second phase, called finishing, removes the rest of the material when the desired measurement is reached. We recommend this work method for thicknesses beyond 18 mm.

    In conclusion, various internal profiles can be seen: square, hexagonal, splined. To make these profiles, Rev srl supplies
    customers with a program specifically made for CNC machines free of charge. The program is available for all CNC machines found on the market.

    REV BROACHING TOOL
    NEW BROACHING SYSTEM
    SAVE TIME AND MONEY WHILE WORKING
    LATHE MOUNTING
    This short video shows the Rev Broaching Tool
    Mounting on CNC lathe without y axis
    (for machines that are equipped with y axis,
    the eccentric bushing is not needed and therefore the tool is
    mounted without it).
    MECHANICAL SPECIFICATIONS OF TOOL
    This tool is made of steel for manufacturing tools and then tempered.
    The insert seating area is hardened to 58 HRC and then subjected to rectification.
    These two operations guarantee considerable resistance to mechanical pressure and a perfect seating of the insert.
    This ensures longer tool life.
    The use of this tool is very convenient given how easy it is to mount and use, particularly regardless of whether there are small, medium or large batches to be produced.
    MOUNTING TO THE MACHINING CENTER OR MILL
    The tool is introduced into a spindle with WELDON connection (it can also be mounted with a standard collet).
    For machines that do not have spindle orientation, simply enter the instruction in mdi mode to perform a perfect alignment (e.g. CNC FANUC M19 instruction).
    This function will orient the spindle into the tool change position, locking it in this position.
    Then, as seen in the video, you need to run a scan aligning the tool work axis, and then proceed to tighten the tool. Finally, remove the alignment plate and introduce the insert; at this point it is possible to start machining.
    Thanks to the REV BROACHING TOOL, there is a considerable time saving in performing this type of machining, while respecting a perfect phasing with the piece that you are working on.
    MOUNTING ON SWAGING MACHINE
    This short video shows mounting the tool onto swaging or filing machines using the adapter. This adapter allows you to work in four positions at 90° to each other thanks to the specially designed joints.
    In practical terms, the tools are extremely rigid, thereby guaranteeing an excellent degree of finishing of machining and increased durability of the insert.

    ONLY SYSTEM IN THE WORLD THAT CORRECTS SYMMETRY ERRORS
    In this video, we wanted to show how it is possible for CNC lathes without a y-axis to perform the inevitable symmetry correction of broaching. REV S.r.l. Would like to point out that this registration system is protected by a patent and is currently the only system in the world that allows CNC lathes to effectively and accurately perform any machining possible with this type of tool.

    The eccentric bushing has a graduated scale engraved on the front and each notch corresponds to a precision value of 0.03mm. The displacement field is +0.5-0.5mm which is more than sufficient for any error correction generally experienced with CNC lathes.
    In the presence of symmetrical errors, it is necessary to loosen the two fixing bolts of the machine tool holder, thus releasing the tool. Then loosen the wing bolt which is located on the eccentric bush collar. At this point, the rotation of the bushing in the desired direction should be performed, correcting and removing any error of symmetry.

    INTERNAL COOLANT SUPPLY
    This short video shows the machining of a simple internal key highlighting the importance of the internal coolant supply.
    The holes of diameter 3.50 for the coolant passage are located in an area of the tool that, not only cools the tool during the cutting, but also has the function of extracting shavings from the hole.
    This action is of utmost importance in blind holes where the accumulation of shavings inside the hole could cause breakage of the tool.

    Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
    5 Stars By Honey from Stuttgart - 2016.11.12 12:31
    Product variety is complete, good quality and inexpensive, the delivery is fast and transport is security, very good, we are happy to cooperate with a reputable company!
    5 Stars By Edward from Maldives - 2015.02.04 14:13

    Related Products

    WhatsApp Online Chat !